StaRyson’s NewtScubr (Submersive Suit) Land/Sea/Air/Space Adapted.

With 80% of the NewtScubr designed around Nanotechnology adepts, the thickness of the suits outer fabrication Mold can be as thin as a T-shirt, and yet strong enough to hold back a G-Force or Pressure weight of up to 100 – 200 Atmospheres (atm) underwater. Lined with “Sensory Feeders” that collect, process and calculate data, it is their primary goal to pre-warn the entire suit and user of when ‘Pressure’ or ‘Gravity’ increases.

The Suit, though Nanites were thought of being the operative method at the beginning, it was also considered to use Graphene Aerogel, which has been tried and tested. Giving the user the ability of rapid movement, unrestricted view, quicker response times and, of course, total and utter protection in the deepest oceans of Earth, across the clouds of the skies or in deep space.

The designs of the suit look pretty cool, while the rest of this Project, including the Helmet and Jet Pack need a little tweaking.

The design we were looking for is a streamline of the prevo suits that you see during space launches today. The inconvenient oxygen tanks, and other parts of the suit you need to enter the capsule. The NewtScubr would be 5 times smaller, 79% more open to Freedom of Movement, while the gloves that go with the suit, not only prevent contact with freezing temperatures, but also the same elements as the suit. And with almost skin-on-skin layers of clothing, space walks will no longer become time consuming, drawn out and restrictive.

DIVER/PILOT/ASTRONAUT

Because the suit will be Fabricated and consist of Nanotechnology or indeed the more favoured choice of Graphene, a user of any size will find comfort in wearing one. And with the many additional accessories that come with the NewtScubr@ Suit, its use (while under water) would be a major benefit to the Water World(s), both on and off of our planet, while just as a basic Space Suit, the difference in a NASA High Suit is beyond comparison.

With the Lightweight Insulation alone, the suit is pre-adapted for DSS (Deep Sea Submersion), while the Radiation Shielding brings the suit up to par for DSE (Deep Space Exploration), and even further than this is the IEC (Inherent Electrical Conductivity), which in a nutshell means it can have sensors and communications devices applied. Furthermore, the suit is protected from Cosmic Radiation, so not too bad for the price.

JET PACK

The Jet Pack 8DRV-A coupled together with the NewtScubr@ Suit, align themselves with the user, both fit and comfort. The main interfaces lead to the micro – pod Hub, located at the back of the suit. It is this Hub that will become the Core Source of the user’s information needed to travel many distances by precision of the processed data collected, by both Suit and Hydro Jet Pack. One Fuel Cell (Collective Energy) will keep a user exceeding a distance of 100 miles (in space), it is worth noting that the similar AT-420 Deep Oxygen Pack could (in theory) take a Diver more than 100 – 200 Atmospheres (atms) and sustain oxygen time for up to 9-12 hours. The whole hold of the suit and safety of the Diver is literally dependent on the strength of the Fabricated Suit, nothing else.

The fuel used, depending on whether He-3 is viable, could inherit the same equal 70-100 mile use under water conditions, while a deep space venture may well prove 5 times this distance, even so, the programmed Jet Pack, integrated with various sensors, will control the direction (NAV), while the shared integration of the He-3 exhaust, which will recycle as much – if not all – wasted Fuel and return it back into the combustion chamber to be reused.

HELMET

Stepping aside from the DSH-11 Series idea, which is about time, the DSH-15 The Sunscape Neuro Helm. The design is smaller, and yet more agile against deep water pressures and non-atmospheric conditions. Once connected to the NewtScubr@ Suit, the Helm assists the user by in-built COMMS and visual sensors to filter, lighten or darken areas below the oceans, or space.

Aligned with everything (and more) that the suit has to offer in protection, the DSH-11 seals in both heat and air, micro filtered intake, recycled recaptured waste air and redistributed within the same system or stored for later use.

The Augmented Visor gives a clear 20/20 view of variable distances controlled through the VC2S (Voice Command System) the Diver uses when exploring. With more than 17 Research Facilities around the world today having the needed materials and equipment, the use of any Visor matching the NEWTSCUBR©® has to be from the Oakley-designed visor for Axiom Space’s AxEMU suit, though the visor for that particular suit could be made smaller for this suit.

As the Oakley possesses the aim to provide superior visual clarity, protection from the extreme lunar environment, as well as state of the art HDO (High-Definition Optics). As quoted: “Future visor systems, including those for the lunar environment, are envisioned with augmented reality (AR) capabilities to display critical information, such as data sensors, maps and preset routes. And it is for this reason that StaRyson would select this AR System Visor.

The LSS (Life Support System), though compact, with a 30-35 KG weight non-aqua, while below 10-15 KG In-Aqua. Its integrated connection to both Helmet, Suit and Jet Pack, make for one of the best underwater experiments ever tested.

TOTAL COST

Let’s get right to it. One NewtScubr® Suit would come complete with all accessories is going to cost any Aqua-nautical, Aviation or Aeronautical company £60 – £80 million pounds. For what the user will get from it, would be long lasting and priceless. Exactly what NewtScubr@ Suit costs in price, it more than makes up with the comfortable sizing, light weight material, it’s huge flexibility in movement whether on land, in the air or under the waves, even the sheer flow of thrust from the brushless Hydro Jet Pack is a monumental step for all mankind in itself. A weekend toy for Bezos, maybe.

At the moment there are no positive choice of colour though the last time I saw the fabric, it was actually transparent, which could be a big problem for the penguins. With designs on a new Jet Pack idea that would adapt perfectly with the NewtScubr, should the available suit material arrive. Until then, any further information we get on this Project will be posted in due course.

Idea and Concept Conceived by Marcus De Storm

#WHOISCASANOVADAVINCI